PP190 RABBIT EAR ALTERNATOR
This 190 amp Rabbit Ear large case is for 1997 Ford gas engines: 4.6, 5.4L & 6.8L
SPECIAL FEATURES
- 5/16-inch battery and ground studs
- Hand-wound stators - 12 gauge copper wire
- Specially designed longer brushes - longer life, up to 40,000 miles more than the industry standard
- Dual plain balanced rotor
- Double greased sealed front bearing (rated at 15,000 rotor RPM)
- Specially designed double greased seled rear bearing which is above industry standard (Rated at 15,000 rotor RPM)
- Twelve (12) press-fit diodes -- low leakage, higher amperage which equals 600 amps of rectification
- Premier regulator is the state of the art design that produces higher output ratings than the current industry standards. With extruded heat sink for more efficient cooling
- Regulator has ground fault protection and high voltage protection
- GXL wire is standard in all harnesses
- Standard O.E.M. shaft size -- specially hardened the same as O.E.M.
- All electric connections are standard
- Standard O.E.M. belt can be used in most applications
- Standard O.E.M. mounting -- no brackets needed
- Weighs 21 pounds
190 AMPS: TESTED AND PROVEN
RPM |
| |
COLD (SAE) | HOT (200°F) | |
| 2000 | 65 | 40 |
| 2500 | 113 | 80 |
| 3000 | 146 | 105 |
| 3500 | 161 | 127 |
| 4000 | 170 | 140 |
| 4500 | 176 | 149 |
| 5000 | 182 | 157 |
| 5500 | 187 | 164 |
| 6000 | 190 | 166 |
| 6500 | 200 | 175 |
ONE YEAR FROM DATE OF PURCHASE.

We
also manufacture the
Pull-Pal winch anchor!